Elecrow
Elecrow
About
- Username
- Elecrow
- Joined
- Visits
- 1,337
- Last Active
- Roles
- Member
Comments
-
Hello @marcobuzzanca , We are sincerely sorry for the inconvenience caused. May I kindly ask what is your ESP32 screen hardware version? Is it v1 or v2?(V2 has an I2C port added, the silkscreen on PCB is SKU: DIS07050H). For v1 we use Arduino_GFX…
-
1.Battery capacity is not limited 2.Charging time = battery capacity (for example 1000MAH)/500MA*1.2=2.4 hours 3.Use a multimeter to measure the positive and negative voltage of the battery when it is fully charged at 4.2V.
-
Hello @Wedgehog , May I kindly ask what's the model type of your screen, and what operating system you running on? This problem may be caused by the improper resolution.
-
Hello @lucacrotti , Please find the bin file at: https://drive.google.com/drive/folders/1MRTFqZ4Xe2yA8_Y0u8WEs_qqlJIt0HKQ?usp=sharing You can refer to this post:https://forum.elecrow.com/discussion/510/how-to-install-the-factory-demo-firmware-with-f…
-
Hello @John_L , Will the following post help you with the prompt issue? https://forum.elecrow.com/discussion/371/crowpi-l-prompt-warning-the-software-needs-to-run-on-crowpi-laptop
-
Hello @John_L , May I kindly ask which LCD do you need to install the digister on?
-
Hello @John_L , Thank you for your sharing.
-
Hello @bertoruiz , May I kindly ask what error message did you met when compiling the demo code?
-
Hello @PGaert , May I kindly ask what's the module type of your screen and where did you download the demo code? For (1), (3), the MusicDefinitions.h and SoundData.h are in the XT_DAC_Audio folder(see the attachment below) For (2), you can download…
-
https://forum.elecrow.com/uploads/376/B6E97LVQLHVZ.zip Hello @wwoofbum , Please install the ESP32-audioI2S library