Elecrow
Elecrow
About
- Username
- Elecrow
- Joined
- Visits
- 1,337
- Last Active
- Roles
- Member
Comments
-
Hello @Daniele , Could you please send us a video to show the problem? Thanks in advance.
-
https://forum.elecrow.com/discussion/comment/911#Comment_911 The letscode installation package is not the whole OS, please refer to this post to install the letscode on CrowPi2 https://forum.elecrow.com/discussion/150/download-link-of-the-latest-ver…
-
Hello @gilwood , You only need to move the 1.desktop file out of the home/pi/.config/autostart folder. There's a mistake in the command posted before. You should run mv home/pi/.config/autostart/1.desktop ~/ or mv ~/.config/autostart/1.desktop ~/ i…
-
https://forum.elecrow.com/discussion/comment/908#Comment_908 Hello @gilwood , You can use the "scrot" installed to take a screenshot. Run sudo scrot -s on terminal. Then drag the mouse to capture the screen, and the captured image will sti…
-
Hello @graememk , Because the SPK port is connected to an NS4168 IIS amplifier chip, the SPK port can not be used as IO ports. https://forum.elecrow.com/uploads/898/43YV1NMLSOEO.png
-
Hello @gilwood , The CrowPi2 run Python3
-
If you want to switch to desktop and don't want to quit the Crowpi2 software, you can click the icon at the top left corner https://forum.elecrow.com/uploads/514/V8BE2SHOMD7O.png
-
Type Crowpi2 and then Enter to start the Crowpi2 software
-
Hello @LYBCE , Sorry, we cannot use VisualTFT software to upload firmware to hmi esp32 3.5-inch. VisualTFT software is designed for the series of hmi with 400M SOC processor(https://www.elecrow.com/display/hmi-display.html), and is not suitable for…
-
Hello @gilwood , Please send some screenshots to help us find out the solution more easily. Thanks for your assistance.