Elecrow
Elecrow
About
- Username
- Elecrow
- Joined
- Visits
- 1,337
- Last Active
- Roles
- Member
Comments
-
@ChrisInTn You can send your order number and requirement to order@elecrow.com. There will be staff to follow up and deal with your problems. ;)
-
@ChrisInTn Hi, Chris. I'm sorry to tell you that the CrowPi L cannot do PD voltage-negotiation at present, which means that you can only use the adapter of CrowPi L.
-
@Suprazz Hi. This screen is customized and cannot be bought in other places at present. You can send your problems and order number to order@elecrow.com or info@elecrow.com, there will be staff to handle and arrange to send you a replacement scree…
-
@Goc5 Hi, please refer to https://www.elecrow.com/wiki/index.php?title=Elecrow_10.1_Inch_Touchscreen_1280x800_IPS_TFT_LCD_Monitor_Kit#Raspberry_Pi_OS_touchscreen_rotate
-
@Don_23805 Hi, Don. Please click the icon in the upper left corner to switch the desktop (Image)
-
@FrankD I‘m really sorry that the CrowPi2 is unavailable to connect a second screen :'(
-
Hi @ChrisInTn You can send email to techsupport@elecrow.com or info@elecrow.com
-
@ChrisInTn The fan is connected with power supply directly. Once the power is on, the fan will work (Image) If you're going to control it, you can remove R1, and connect the left pad to GPIO you need to use. And leave the right pad without wiring.
-
@BGA Hi, I'm sincerely sorry to tell you that letscode for Raspberry Pi only includes CrowPi2 and CrowPi L modules. (Image) You can play Crowbits with Windows/Mac system computer. Sorry again for the inconvenience.
-
HI, @howarde Camera The camerea is a USB camera. You can use it with Mplayer. Step1. Open the camera Run "sudo mplayer tv://" on terminal after downloading Mplayer. (Image) Then you will see the camera window Step2. Take pictures …