Elecrow
Elecrow
About
- Username
- Elecrow
- Joined
- Visits
- 1,337
- Last Active
- Roles
- Member
Comments
-
We're sorry that the UI of the Pi Panel is only compatible with 1920 * 1080 resolution. Therefore, if you change the resolution of CrowPi L, the Pi Panel will not display full screen. CrowPi L OS you can run "sudo nano /boot/config.txt" …
-
@ChrisInTn The CrowPi L is supposed to power down completely. This process is also detected by I2C. If the L cannot be shut down completely, it indicates that there is a problem with I2C communication. If the I2C problem cannot be solved by rein…
-
@Pierre Hi, the instruction on How to remove the mainboard of CrowPi L? has posted, please click the link to read.
-
@gbarwis Please reach out for techsupport@elecrow.com
-
@gbarwis Hi there, please try sudo python3 dh11.py
-
We're uploading the full image file and it will take a long time. Did you download the four files to the same folder? And I noticed that your file suffix is different from mine. (Image) Before the direct download link is generated, please try do…
-
@Mahrran I'm sorry for the inconvenience caused to you by my mistake. You only need to select one of the files to unzip. I have modified the instructions again. Please refer to it. Thank you for your feedback to make us better.
-
@Mahrran No, you don't need to change the format. After downloading the volume files, please select all of the files and right click the mouse, then click "7-Zip" and select "Extract here" to extract all 4 files together. The rea…
-
@ChrisInTn Hi, the maximum input voltage of CrowPi L can be 36V.
-
@ChrisInTn Not at all. The ports in use are pin3 (SDA1) and pin5 (SCL1)