Elecrow
Elecrow
About
- Username
- Elecrow
- Joined
- Visits
- 1,337
- Last Active
- Roles
- Member
Comments
-
Hello @RussellCofIdaho , The image in Games SD card is a standard RetroPi. You can try to reinstall RetroPi to see if it will work. https://forum.elecrow.com/uploads/483/C5JI60FMFHWA.pdf
-
Hello @cooljack , I‘m sorry you there's no method to read the battery voltage directly
-
Hello @miracle , Please modify the display configuration according to https://forum.elecrow.com/discussion/585/esp32-hmi-demo-code-updated-compatible-with-new-version-of-esp32-package
-
Hello @miracle , You need to copy the lv_examples.h and lv_demos.h in the examples and demo foldersto the lvgl(or lvgl-3)/src directory
-
Hi @jalsop , Here's the new firmware: https://forum.elecrow.com/uploads/347/DBOO1PX0VOXZ.zip https://forum.elecrow.com/uploads/562/CYAEJ85400UU.png
-
Hello @jalsop , Did you follow this instruction:https://forum.elecrow.com/discussion/510/how-to-install-the-factory-demo-firmware-with-flash-download-tool/p1?new=1 to install the firmware? The firmware in the Google Drive is old. You can try follow…
-
Hello @hymd , The Elecrow Parts Library list is closed. Could you send the link you visited for us to check?
-
Hello @hemonu , 1. The pins are defined according to the GPIO numbers. https://forum.elecrow.com/uploads/849/RYM4JBPBLRRH.png 2. A-bin is the firmware that includes the driver, and B-bin is the firmware that does not include the driver. 3. For th…
-
Hello @DougWaterford , Please refer to: https://forum.elecrow.com/uploads/711/DW2UNFEJA92I.png https://forum.elecrow.com/uploads/641/660G9IJ1WXN1.png
-
This is because the size on the board is limited. When burning, it is configured OTA is disabled. If you want to use it, you have to choose the option with OTA when burning, but the program cannot be too large, otherwise it will not burn in