ChrisInTn
ChrisInTn
About
- Username
- ChrisInTn
- Joined
- Visits
- 27
- Last Active
- Roles
- Member
Comments
-
Question for Admin - is the "gpio board" you referenced what I've been referring to as the "fan board"? I know I've already damaged one pin on the fan board. Thanks, Chris
-
Thanks, that lets me know what NOT to touch😁. Back to the other question - is the L supposed to power down completely? Mine doesn't. Chris
-
Thanks! Chris
-
Thanks! Great information. One more silly question - which I2C pin(s) are already in use? Also, is the "L" supposed to turn itself off on software shutdown? I thought it was doing so when new, but it doesn't now, for unknown reasons (that'…
-
One quick note/fix - I had several problems with the pipanel and battery monitor. It turned out that the internal board was locked up. Rebooting the Pi wouldn't reset the internal support board. I ended up shutting down, and unplugging the internal …
-
You probably need to copy the error message to this thread, and possibly the entire code block, before anyone can help you. Then be patient, this forum is a wee bit slow... Chris
-
Yay! Fixed it. This probably needs to be a sticky somewhere... If the CrowPi-L stops talking to the battery-monitor/Pi-Panel, try unplugging the battery for a minute. That unstuck something in mine! Chris
-
Okay, now I'm in REAL trouble. It appears Elecrow is using i2c to talk to their hardware, and now their hardware isn't answering. Process so far: 1. burn new image of elecrow version of Linux, and install. - no change 2. install alternate pi4. - no…
-
uh-oh. Now I'm in trouble... I did apt-get update and apt-get upgrade on both my images last night (pi os and whatever you guys are using). Now, I'm getting an IIC error on the battery monitor on both images! qt5ct: using qt5ct plugin …
-
Tried this on Crowpi-L, no Luck.