Comments

• @Winny @Sun Could you please explain these freq_write differences which I mentioned in the previous comments? Thanks in advance

  in Display Response difference Comment by Anand October 28
• Here the frquency difference in the code In the 5" inch display main program(demo code) cfg.freq_write = 15000000; In the 3.5" inch display main program(demo code) cfg.freq_write = 80000000; I tried to set the cfg.write value in the 5&quo…

  in Display Response difference Comment by Anand September 12
• Got it. Thank you for the clarification :)

  in Pin mapping understanding Comment by Anand September 10
• ok. So, both display's interface is same, only the memory and resolution are the causes for this response timing difference? But I observed a clock frequency difference in the hal folder of the demo codes.

  in Display Response difference Comment by Anand September 2
• @Igor I am also working on the CrowPanel ESP32 HMI 5.0'' Display and able to make display up by using the demo code which i referred in the below link. https://www.elecrow.com/wiki/esp32-display-502727-intelligent-touch-screen-wi-fi26ble-800480-hmi…

  in Looking for a working example Comment by Anand August 29