#LoRaWAN — ELECROW - FORUM https://forum.elecrow.com/index.php?p=/ Tue, 21 Apr 2026 15:32:36 +0000 en #LoRaWAN — ELECROW - FORUM LR1302 Gateway Module+ HAT FAQ https://forum.elecrow.com/index.php?p=/discussion/899/lr1302-gateway-module-hat-faq Tue, 22 Oct 2024 09:28:33 +0000 ESP32 & Lora Elecrow 899@/index.php?p=/discussions This page will list the questions for your reference. I hope this will help you ;)

** Hardware**

1.Can the LR1302 Gateway Module be used with other Hats?
2.Can the LR1302 Gateway Module be used for AU915?
3.Can the LR1302 Gateway Module + HAT use with other Microcontroller?

** Software**

1.Can I use the LR1302 Gateway Module+HAT to transmit video?
2.How should solve the errors when using the LR1302 Gateway Module+HAT?

]]> CrowPanel 5.0"-HMI ESP32 Display 800x480 RGB TFT https://forum.elecrow.com/index.php?p=/discussion/27485/crowpanel-5-0-hmi-esp32-display-800x480-rgb-tft Wed, 01 Oct 2025 13:14:34 +0000 ESP32 & Lora Adam 27485@/index.php?p=/discussions CrowPanel 5.0"-HMI ESP32 Display 800x480 RGB TFT
Hello, I would like to purchase the above-mentioned panel, but I need information on which Lora module from your offer I need to buy and I would be interested in the connection diagram for the board.

]]> The basic lora gateway issue https://forum.elecrow.com/index.php?p=/discussion/583/the-basic-lora-gateway-issue Wed, 29 Nov 2023 15:04:49 +0000 ESP32 & Lora ramazanali 583@/index.php?p=/discussions I can not connect to wifi of basic lora gateway module. This module with black box and ssid ELECROW-GW1C. I am not successful with PC or Phone or Laptop.

]]> Value of L2, L3, L4 on SKU CRT01262M https://forum.elecrow.com/index.php?p=/discussion/1093/value-of-l2-l3-l4-on-sku-crt01262m Fri, 14 Feb 2025 14:04:57 +0000 ESP32 & Lora anandvartak 1093@/index.php?p=/discussions Can someone tell me the value of L2, L3, and L4 on LoRaWAN Gateway Module Based on ESP32 with 1.8” LCD - 1 Channel for Long Range Communication-868 MHz. I opened the eagle files available on wiki page link below
https://www.elecrow.com/wiki/lora-basic-gateway-module.html
the Schematic file value is 120R which feel wrong as inductor value is in uH of nH.

]]> CrowPanel CM-4 7" display - driver to expansions modules https://forum.elecrow.com/index.php?p=/discussion/991/crowpanel-cm-4-7-display-driver-to-expansions-modules Tue, 10 Dec 2024 10:11:28 +0000 Elecrow HMI Display danilo 991@/index.php?p=/discussions I bought a CrowPanel CM-4 7" display from Elecrow. I ordered the two options G4 and Lora (WiFi) at the same time because I might need them later.
Now I have to realize that if you order these options, certain interfaces such as RS485 are no longer possible. It's a shame that there is no indication when ordering that if you choose an option, certain interfaces will no longer be available. It would be nice if this could be added on your website.

Now I need to know which drivers I have to uninstall so that I can have the interfaces I need (2xRS485) available again. I'm still a beginner with Raspberry Pi. I'm not using G4 or Lora at the moment.

Thank you very much.

]]> Incorrect shipment order #232601 https://forum.elecrow.com/index.php?p=/discussion/952/incorrect-shipment-order-232601 Sun, 17 Nov 2024 15:17:30 +0000 ESP32 & Lora bgrattan 952@/index.php?p=/discussions My order was for a US915 unit and I received a LR1302-SPI-EU868 by mistake.
Please send correct unit. Thank you. bgrattan@umw.edu

]]> 1 channel LoRaWAN Gateway location settings https://forum.elecrow.com/index.php?p=/discussion/891/1-channel-lorawan-gateway-location-settings Sat, 19 Oct 2024 19:38:43 +0000 ESP32 & Lora TechNash 891@/index.php?p=/discussions Hello,
I've tried setting the location of my Elecrow Lorawan gateway via the manual setting on thethings.network but after some time, the location always seems to change back to Asia. I assume this is set somewhere in the coding of the Gateway. Where might I find and adjust that to be my own location?
Thanks!
Mark

]]> Can 1 channel LoRaWan Gateway Module be used with chirpstack lorawan server? https://forum.elecrow.com/index.php?p=/discussion/721/can-1-channel-lorawan-gateway-module-be-used-with-chirpstack-lorawan-server Wed, 08 May 2024 01:39:17 +0000 General Discussion letscode 721@/index.php?p=/discussions Can 1 channel LoRaWan Gateway Module be used with chirpstack lorawan server?

]]> LoRaWan 1 ch Gateway Module Based on ESP32 - issues and questions https://forum.elecrow.com/index.php?p=/discussion/597/lorawan-1-ch-gateway-module-based-on-esp32-issues-and-questions Tue, 19 Dec 2023 03:31:14 +0000 Announcements tecsol 597@/index.php?p=/discussions Can't extract .rar file: I have downloaded this file but it will not extract on windows and unix computers: https://www.elecrow.com/download/product/CRT01262M/ESP-Lora_Factory_program.rar

Maybe provide a .zip version?

I made a mistake entering the node ID on the initial startup page (I didn't fill in 16 bytes, but the software accepted it anyway), and I can't fnd how to return to the configuration page to try again.

How do I go back to the factory startup screen?

]]> CRT01262M - Arduino IDE Project https://forum.elecrow.com/index.php?p=/discussion/717/crt01262m-arduino-ide-project Sat, 04 May 2024 07:47:40 +0000 ESP32 & Lora Alrakis75 717@/index.php?p=/discussions Hello everyone, I am following the tutorial to flash the Lora Gateway application on the ESP device. The "Hello world".ino file has been loaded successfully.
When I approach the Gateway_sc, I start to have problems with the libraries and also get messages of missing configurations. Could you please share the whole project (with related libraries) so that our activities can be smooth)?) Thanks

]]>