CrowView Note — ELECROW - FORUM

Crowview Note Windows 11, Touchpad, screen and speakers working, Keyboard unresponsive

Lantalia — Sat, 22 Nov 2025 21:29:33 +0000

Trying to hook up the CrowView Note to a GMKtec M5 Win 11 mini PC. The screen, sound, and touchpad work fine, but the keyboard itself doesn't generate keypresses and the fn keys don't appear to do anything. Win 11 is up to date. When the left USB A is connected, it is recognized as a HID Keybaord, but only the touchpad works. Upgrading the driver doesn't provide any other options than what it is already detected as, uninstalling that driver renders the touchpad inoperable until the USB A connector is removed and reinserted. Hooking up a second keyboard to the computer works fine. Fn key lock light is active during post, and then turns out as windows is starting. FN+Esc does not toggle the lock light, and none of the other FN shortcuts do anything. USB cable and connector on computer are blue (USB 3.0)

👍CrowView Note Secrets Revealed: Walkthrough Robert Feranec's Factory Tour&Exclusive 15% Discount!

Doreen1020 — Wed, 03 Dec 2025 06:42:03 +0000

😎What Happens When a YouTube Electronics Influencer Visits The Elecrow Factory?

Robert Feranec, with over 240K+ subscribers on YouTube, is known for his deep expertise in electronics, PCB layout, and more.
🎉We were very honored to invite him to visit our factory and witness firsthand the entire production process of our CrowView Note, from PCB to the final product, step by step!
————————————————————————————————————————————
The complete process is as follows
(🎁including factory video and 15% discount code):
https://www.elecrow.com/blog/the-secret-behind-crowviewnote-inside-youtube-electronic-influencer-robert-feranecs-factory-tour-exc.html

CrowView Note - What to do if the keyboard and touchpad do not work when the HD cable is connected?

Jully — Fri, 21 Mar 2025 07:23:07 +0000

Make sure the CrowView Note's USB-A interface is connect to your master device.
If connect to the USB-A interface, the CrowView Note's keyboard and touchpad are not available.

CrowView Note - When the Switch on the bridge board is set to OFF, why the fan is still operating?

Jully — Thu, 24 Jul 2025 02:59:45 +0000

The Switch (K2) on the Pi-5 Bridge Board only controls the power supply to the Type-C interface (J2), which in turn supplies power to the Raspberry Pi system, and it does not control the USB-A interface. Thus the USB-A will still be providing power to the Raspberry Pi's USB port, causing the fan to still get power. So, you need to shut down and power off the CrowView Note to stop the fan from operating.

CrowView Note - Battery died!

lyx — Sat, 25 Jan 2025 01:09:02 +0000

I received my CrowView Note in November 2024 and it was working fine then. Battery was able to last at least a few (2-3) hours. When turning on the device after a month or so, battery is empty so the device is charged. But after a long time (3-4 hours), the device can only turn on for about 10 seconds before turning off. When checking the charging indicator above INSERT key, it turns off after a few minutes of charging and display shows a green full battery. However, the device can only power on for about 10 seconds before turning off again. Please help me

CrowView Note - Charging From Power Bank

PeterWAWood — Thu, 26 Jun 2025 01:18:48 +0000

Can the CrowView Note be charged from a Power Bank using a USB to Barrel Jack connector?

CrowView Note - USB serial adapter compatibility

wiredOr — Wed, 30 Apr 2025 16:03:42 +0000

Hey folks,

I wonder if the CrowView Note 14 is compatible with any USB-to-serial adapter cables on its USB-A port? I would like to connect to a system that only has exposed RS232 instead of USB.

Thanks in advance!

CrowView Note - Does it support wireless projection?

Jully — Thu, 05 Jun 2025 03:19:06 +0000

It does not support wireless projection.

CrowView Note - What should I do if it is not displaying?

Jully — Fri, 21 Mar 2025 07:21:36 +0000

Please make sure to power the CrowView Note through the DC Interface.
Please make sure your device supports Type-C with full-featured.
Reboot your device and CrowView Note.

CrowView Note - Replacement power supply

CrowSloth — Mon, 17 Mar 2025 19:10:18 +0000

Good afternoon, the power supply for my CrowView Note got squeezed in my backpack, and since I had the US version, the prongs for the mains power connection broke off.
I cannot find a replacement on the Elecrow homepage. Are you planning on offering one soon? If not, can you recommend a third party power supply that will work, or give me the details on what I need to buy? It looks like I would need one that can deliver 12V, 4A, and has a 3.5mm barrel plug with the outside being negative. Is that correct?