Burning the factory firmware tutorial of CrowPanel Pico Display

edited October 24 in Elecrow HMI Display

1. Preparation:
* USB-A to Type-C cable
* Laptop/PC
* CrowPanel Pico Display

2. Flash the firmware:
Step 1
Download the firmware with corresponding of the display size.

Step 2
Connect the Type-C interface of the Pico Display. Note: Connect the Type-C port whose silk print is USB.

Step 3
Press the 'BOOT' button first and then connect the USB-A of the PC/laptop until aU disk pops up in the PC/laptop, then release the 'BOOT' button.

Step 4
Drag the downloaded firmware to the U disk that just popped up.

Step 5
Wait a minute. If the interface disappears, the firmware is burned successfully.

Step 6
In the last step, we press the 'RESET' button of the Pico Display to restart and it will show the Demo.

Sign In or Register to comment.