Elecrow HMI Display

Discussion	Started By	Replies	Views	Most Recent
could you kindly provide the 3D design file (.stl or similar) for the Elecrow RC070S enclosure/case	Jennie September 2	0	257	Jennie September 2
on the CrowPanel Advance 7.0, I wish to have a tft card plus a nRF2401 module , is it possible ?	Jennie September 2	0	152	Jennie September 2
All displays ESP32S3 HMI 5", HMI 7", HMI adv. 4.3" / 5" /7" flicker	DO1AWD August 15	4	930	Phil91 September 2
why does not my DIS02170A(CrowPanel Advance 7“ HMI) with the lora add-on module support meshtastic	Jennie August 26	0	239	Jennie August 26
7" V1.2 Crowpanel with SX1262 plug in Lora module (non meshtastic)	Phil91 August 25	0	229	Phil91 August 25
which kind of battery i should use for crowpanel basic and advance series devices?	Jennie August 14	0	271	Jennie August 14
LVGL differences between crowpanel bassic 5" and crowpanel advance 5", i wanna get a program ported	Jennie August 14	0	273	Jennie August 14
Why isn't serial port on 2.13-inch e-paper device showing up on computer? but 2.9-inch e-paper can	Jennie August 14	0	211	Jennie August 14
Need a Basic Working Example for Elecrow CrowPanel Pico 2.8" (ST7789)	Soundmit August 7	2	594	Jennie August 12
Does this display (SKU: DIS06043H-1) meet EMC regulations?	Jennie August 4	0	195	Jennie August 4