Elecrow HMI Display

Discussion	Started By	Replies	Views	Most Recent
could you kindly provide the 3D design file (.stl or similar) for the Elecrow RC070S enclosure/case	Jully September 2025	0	526	Jully September 2025
on the CrowPanel Advance 7.0, I wish to have a tft card plus a nRF2401 module , is it possible ?	Jully September 2025	0	412	Jully September 2025
why does not my DIS02170A(CrowPanel Advance 7“ HMI) with the lora add-on module support meshtastic	Jully August 2025	0	1.5K	Jully August 2025
7" V1.2 Crowpanel with SX1262 plug in Lora module (non meshtastic)	Phil91 August 2025	0	499	Phil91 August 2025
which kind of battery i should use for crowpanel basic and advance series devices?	Jully August 2025	0	562	Jully August 2025
LVGL differences between crowpanel bassic 5" and crowpanel advance 5", i wanna get a program ported	Jully August 2025	0	625	Jully August 2025
Why isn't serial port on 2.13-inch e-paper device showing up on computer? but 2.9-inch e-paper can	Jully August 2025	0	484	Jully August 2025
Need a Basic Working Example for Elecrow CrowPanel Pico 2.8" (ST7789)	Soundmit August 2025	2	1.3K	Jully August 2025
Does this display (SKU: DIS06043H-1) meet EMC regulations?	Jully August 2025	0	423	Jully August 2025
[Crowpanel Advance HMI] The reset button has fallen off. What should I do?	Jully July 2025	0	694	Jully July 2025