Elecrow HMI Display

Discussion	Started By	Replies	Views	Most Recent
Another Flickering Advance V1.2 question need some help	Phil91 September 2025	1	878	Jully September 2025
CE/RED compliance confirmation for CrowPanel Advance 3.5″ & 4.3″ (ESP32-S3) — UK use	BBMS September 2025	6	3.5K	Jully October 2025
Can I connect two UARTs to CrowPanel 4.3" basic	Jully September 2025	0	546	Jully September 2025
could you kindly provide the 3D design file (.stl or similar) for the Elecrow RC070S enclosure/case	Jully September 2025	0	526	Jully September 2025
on the CrowPanel Advance 7.0, I wish to have a tft card plus a nRF2401 module , is it possible ?	Jully September 2025	0	412	Jully September 2025
CrowPanel keeps resetting	Lorenzo September 2025	2	1.7K	Jully September 2025
CrowPanel 5.0 V3 - DIS07050H, Backlight Controller doesn't work	hobbyist August 2025	2	1.8K	Jully September 2025
Crowpanel 7 Advance UART1	Algirdas August 2025	3	2.2K	GiancoR74 September 2025
why does not my DIS02170A(CrowPanel Advance 7“ HMI) with the lora add-on module support meshtastic	Jully August 2025	0	1.5K	Jully August 2025
7" V1.2 Crowpanel with SX1262 plug in Lora module (non meshtastic)	Phil91 August 2025	0	499	Phil91 August 2025

Discussion List